Make Recycled T-Shirt Bags

HOW TO

T-Shirt Bag

How to make your own bag out of a t-shirt. You will need:

  • T-Shirt
  • Sewing Machine. I used a needle specific for stretch fabric.
  • Thread and bobbin thread
  • pencil, scissors, ruler

Read ALL instruction first before cutting. This project takes approximately 30 minutes not including cutting/prep time.

Step 1 Choose a t-shirt that is made from a thick cotton material. If your t-shirt is worn and thinning, but you love it and really want to use it then consider taking the time to make a lining for it.  That way it will be more sturdy. This tutorial will only show how to make an unlined t-shirt bag.

Step 2 Before you cut the neck measure 8cm from shoulder seam to where you will be cutting the neck. This will ensure that you have enough material to fold twice to sew your hem (later in Step 6). Cut away the neck and sleeves; now the t-shirt resembles a tank top!

Then cut a square of fabric away at the bottom corners of the t-shirt. (see photo) I measured 5cm x 5cm. When you open the fabric it will of course be a rectangle. Set it aside and save it for Step 4 part D.

  • When you cut the sleeves off, attempt to leave the seam intact. So cut on the outside of where the sleeve is stitched to the body of the shirt.

T-shirt bags step 2

Step 3 !!! Turn the t-shirt inside out before you start sewing!!!  Sew the bottom of the t-shirt. Notice where I place the foot of the machine so that the needle will sew just above the first horizontal seam. This way when the bag is turned outwards one seam stitch will still show, which looks nice. This leaves about an inch of material on both sides of the bottom seam to give the bag a little more support (see Step 4C).

T-shirt bags Step 3

Step 4 Now it is time to sew the gusset.  A) This is what the bottom of the bag looks like at the end of Step 3. (see photo below)

T-Shirt bags Step 4

B) Now you need to open and lay flat from where you cut the corner squares out. (see photo below)

B) T-Shirt bags prep Step 4b

C) Open and flatten the stitches you made in Step 3 (like this: see photo below).

C) T-Shirt bags prep Step 4c

D) Open and line up the ‘square’ from step 2. You don’t need to do this part with the extra fabric, but I decided that if I was going to bother to make a bag out of a t-shirt, I would make it as durable as I could. So this extra piece of material is meant to act as a reinforcement for the gusset. If you choose not to use the extra material, then you would just sew across to close this opening.

D) T-Shirt bags prep Step 4d

E) Line up the extra material under the gusset opening like this. (see below)

F) Now fold over the material and try to sew it on far enough from the cut edges to ensure that the opening is securely stitched and will not break open when something heavy is put into the bag 🙂

E) T-Shirt bags prep 4e  F)T-Shirt bags prep Step 4f

G)T-Shirt bags prep Step 4G   H) T-Shirt bags prep Step 4H

Congratulations! You have completed one side of the bottom of your bag. Repeat on the other side.

I) T-Shirt bags prep Step 4i

Step 5  Once both sides have been closed and the base of the bag looks complete. Turn it right-side out and ensure there are not surprise openings! (see above) I used this stitch #22 (on a Tempo, BabyLock sewing machine). Most machines of other makes have a similar stitch. It is used to secure seams.

A)T-Shirt bags prep Step 5

Go ahead and turn your bag inside out. Isn’t it exciting! It’s actually starting to look like a bag 🙂  Once inside out arrange the gusset under the foot so that when you start to sew you don’t inadvertently sew the side of the bag to the bottom. Sounds like I’ve got some experience with that happening.

B) T-Shirt bags prep Step 5a   C) T-Shirt bags prep Step 5b

Turn your bag right-side out and admire the beautiful stitching. So pretty.

D) T-Shirt bags prep Step 5c

Step 6 Folding Hems for Handles. The bag is now turned right-side out. Start with the neck of the bag. Fold approximately 1cm of fabric towards the right-side of the fabric. (see photo Step 6A). Then fold a second time. (see photo Step 6B).

A)T-Shirt bags prep Step 6A    B) T-Shirt bags prep Step 6B

Now go ahead and sew the hem. All the while folding twice as the machine is making its way around the neck of the bag. Like this, in photo (C). Photo (D) shows what the hem looks like just around the neck of the bag. Now it’s time to sew the hem where the sleeves used to be.

C) T-Shirt bags prep Step 6C   D) T-Shirt bags prep Step 6D

In the photo below you can see how the first hem is stitched. Photo (E) shows the first fold of the fabric for hemming the side of the handle where the sleeves used to be. Photo (F) shows the second fold of fabric for the hem.

E) T-Shirt bags prep Step 6E    F) T-Shirt bags prep Step 6F

Photo (G) shows where I begin stitching the hems for the handles. I go all the way around and end at the spot where I started to backstitch.

G) T-Shirt bags prep Step 6G    Finish T-Shirt Bag

And That’s It! Have fun making your very own T-Shirt bags! Give some away and teach others how to make their own. Spread the love 

 

In this segment: Photos by Falcon. Photo Editing by Falcon’s Mom.

Together, Let's Change the World!

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s